MBL004B |
Deep UV uvc-led module |
This module is applicable to various devices with static water storage tank.
3~6 mW
Optical power
270~280 nm
wavelength
nothing
Atmosphere lamp
24 V
Voltage
40 mA
current
GB/T 4827-2015
Constant voltage drive: 24V
Lead specification: ul2468-24awg parallel wire, xh2 54 black terminal head
Terminal specification: 2pin
Waterproof grade: module front (quartz window surface) IP68 dust-proof and waterproof (excluding terminal)
Service temperature: - 25 ~ 50 ℃
UVC photoelectric parameters and spec range (TA = 25 ℃, Rh = 30%)
| Item | Symbol | Min. | Typ. | Max. | Unit |
|---|---|---|---|---|---|
| working voltage | Vf | / | 24 | / | V |
| Driving current | If | / | 40 | / | mA |
| Peak wavelength | λp | 270 | / | 280 | nm |
| Optical power | P0 | 3 | / | 6 | mW |
| Irritation angle | 2θ1/2 | / | 60 | / | deg. |
- These values were measured by a spectral analyzer and an integrating sphere measuring system. The tolerances are as follows: operating voltage (Vf）: ± 2%; optical power (P0）: ± 10%; peak wavelength (λp）：±3.0 nm
- Although all LEDs are tested by our equipment, some values may be slightly different depending on the conditions of the test equipment.
UV power test: using the integrating sphere, the UV power output of the test module is the specified value;
UV wavelength range test: 270 ~ 280 nm;
Insulation withstand voltage test: apply ac1500 V, 50Hz voltage between the live part and the shell for 1min without breakdown& nbsp;
High and low temperature test: the product can work reliably within the temperature range of - 25 ~ 40 ℃; It can be stored reliably within the temperature range of - 40 ℃ ~ 85 ℃.
- The product must be handled with care. It is strictly prohibited to fall and sharp tools are strictly prohibited to contact the product, especially the bright surface of lamp beads;
- Do not use unqualified power supply for driving;
- The product shall be used in the environment within the rated temperature range and shall not be lit for a long time in a high-temperature closed environment;
- Do not expose the module directly in the high humidity environment, and do a good job in waterproof and moisture-proof isolation;
- If the product needs a transparent window, it is recommended to use high-purity quartz glass plate, which can effectively penetrate ultraviolet rays.
- All assembly workers, observers and bystanders must have eye and skin protection;
- It is forbidden to observe with naked eyes (including through microscope) and handle deep UV LED naked in operation;
- Do not touch the optical structure of the deep UV lamp bead;
- This product is a humidity sensitive product, the recommended storage temperature is 18 ℃～ 30 ℃, the humidity is 30% ～ 60%, and sealed. In order to ensure the product quality, it is recommended to use it within one year after leaving the factory if the outer packing bag is not opened; if the outer packing bag is opened, it is recommended to use it within 24 hours, and re seal it for storage after 24 hours. Dehumidification measures should be taken before the next use: temperature: 65 ℃ time: 5h.
